Table of Contents
Advertisement
card
card
To enter Card Configuration submode, enter the card command in Global Configuration mode.
Syntax Description
slot-list
all
digit | digit,digit
Defaults
This command has no default settings.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Card-specific read-write user
Enter Card Configuration submode to enable, disable, configure, and reinitialize cards in your Server
Switch.
Examples
The following example enters Card Configuration submode for all cards on the Server Switch. Any
commands that execute in this mode apply to all of the cards in the chassis.
SFS-7000P(config)# card all
SFS-7000P(config-card-1,6,11,15-16)#
Related Commands
clock set
delete
install
show card
show card-inventory
shutdown
Cisco SFS 7000 Series Product Family Command Reference Guide
2-12
card {slot-list | all | digit | digit,digit | digit-digit}
Card, list of cards, or range of cards to configure.
Configures all cards in the chassis.
Specifies the slot numbers for cards you want to configure in the chassis.
Chapter 2
Administrative Commands
OL-9163-02
Advertisement
Table of Contents
