Table of Contents
Advertisement
snmp-server
snmp-server
To store contact and location information and to configure the SNMP notification host and SNMPv3
user, enter the snmp-server command in Global Configuration mode. To replace these values with
empty strings, enter the no form of this command.
Syntax Description
contact
host
engineID
local
engine-string
location
contact-string
dest
community-string
recv-event-traps
location-string
user
username
disable
enable
privilege
enable traps
authentication
Cisco SFS 7000 Series Product Family Command Reference Guide
2-66
snmp-server {contact "contact-string" | engineID local engine-string | host dest
[community-string] [recv-event-traps] | location "location-string" | enable traps
authentication}
snmp-server user username {disable | enable | privilege privileges | v3 [encrypted] auth
{md5 | sha} password [priv des56 privacy]}
no snmp-server {contact | host ip-address [recv-event-traps] | location | user username v3 |
enable traps authentication}
Stores the contact information for your Server Switch. This contact
information appears in the show version command output.
Configures your Server Switch to communicate with the host that receives
SNMP traps from your Server Switch.
Configures a SNMPv3 engine ID.
Configures the engine ID of the local agent.
Engine ID, as a 15-octet string.
Stores location information about your Server Switch. This contact
information appears in the show version command output.
ASCII text string of contact information.
IP address or DNS name of an SNMP server.
(Optional) SNMP community string that authenticates your Server Switch
to the SNMP server.
(Optional) Configures the Server Switch to send SNMP traps to the receiver.
If you configure this keyword, the remote host receives SNMP events as
well as traps.
ASCII text string of location information.
Specifies the user ID that you want to configure.
User ID that you want to configure.
Disables the SNMP user.
Enables the SNMP user.
Assigns privileges to the user.
Generates a trap each time a user is blocked from accessing the system.
Chapter 2
Administrative Commands
OL-9163-02
Advertisement
Table of Contents
