Table of Contents
Advertisement
Chapter 3
Fibre Channel Commands
fc srp itl
To configure an initiator-target-LUN (ITL) group—a fully-configured link between an initiator and
Fibre Channel storage—on your Server Switch, enter the fc srp itl command in Global Configuration
mode. To delete an ITL entry or reset the description of an ITL to an empty string, use the no form of
this command.
Note
For a breakdown of the different actions that you can perform with the fc srp itl command, refer to
Table
Syntax Description
guid
extension
wwpn
LUN
description
descr
dynamic-gateway-
port-failover
default
dynamic-gateway-
port-loadbalancing
dynamic-path-
affinity
gateway-portmask-
policy
restricted
port-selection
OL-9163-02
3-1.
fc srp itl guid extension wwpn LUN {description "descr" |
dynamic-gateway-port-failover [default] |
dynamic-gateway-port-loadbalancing [default] | dynamic-path-affinity [default] |
gateway-portmask-policy {default | restricted {port-selection | all}} |
io-hi-mark mark [default] | lun-policy {default | restricted} | max-retry retry [default]
| min-io-timeout timeout [default] | srp-lunid lunid logical-id logical-id}
no fc srp itl guid extension wwpn LUN {description | dynamic-gateway-port-failover |
dynamic-gateway-port-loadbalancing | dynamic-path-affinity |
gateway-portmask-policy restricted port-selection | io-hi-mark | lun-policy
restricted | max-retry | min-io-timeout}
Global unique identifier (GUID) of the initiator.
GUID extension of the initiator.
World-wide port name (WWPN) of the target port of the FC storage device.
FC LUN ID of the FC storage disk.
Assigns a text description to the ITL.
Alphanumeric description (up to 50 characters) to assign to the
initiator-target-LUN.
The fc srp itl command no longer supports this syntax.
Note
(Optional) Sets an attribute to its global default value.
The fc srp itl command no longer supports this syntax.
Note
The fc srp itl command no longer supports this syntax.
Note
Defines the port restrictions that apply to the initiator for that ITL.
Denies the initiator access to select ports or LUNs for the ITL. Grants the
initiator access to select ports or LUNs when you use the no keyword.
Port, list of ports, or range of ports that the initiator can or cannot access for
the ITL.
This syntax appears for legacy purposes. Use the config
command to set this feature.
This syntax appears for legacy purposes. Use the config
command to set this feature.
This syntax appears for legacy purposes. Use the config
command to set this feature.
Cisco SFS 7000 Series Product Family Command Reference Guide
fc srp itl
fc srp lu
fc srp lu
fc srp lu
3-9
Advertisement
Table of Contents
