Table of Contents
Advertisement
fc srp-global itl
Table 3-3
Table 3-3
Policy
sequential
dynamic-gateway-port-failover
dynamic-gateway-port-loadbalancing
Cisco SFS 7000 Series Product Family Command Reference Guide
3-20
provides usage guidelines for this command.
Usage Guidelines for fc srp-global itl Command Arguments
Description
(Optional) Configures SRP global defaults for LUs of
sequential access devices. Without this keyword, the
configuration will be for the global defaults for LUs of
random access devices.
SRP global defaults for LUs of random/sequential access
devices.
Default for random devices: false
Default for sequential devices: true
This value is applied to LU entries as their default setting
at entry creation time. You can overwrite the value on LU
basis later.
Allows the controller to select an alternate gateway
interface port if the primary path fails. Enter the
fc srp-global itl command with this keyword to enable
this feature. Otherwise, include the no keyword at the
beginning of the command string to disable this feature. If
you enable this policy, you implicitly disable port load
balancing and dynamic path affinity.
SRP global defaults for LUs of random/sequential access
devices.
Default for random devices: true
Default for sequential devices: false
This value is applied to LU entries as their default setting
at entry creation time. You can overwrite the value on LU
basis later.
Allows data to be sent between the initiator and Fibre
Channel target using all available ports on the gateway
interface. Port selection relies upon comparative I/O
traffic. The controller attempts to distribute traffic equally
between the ports. Enter the fc srp-global itl command
with this keyword to enable this feature. Otherwise, include
the no keyword at the beginning of the command string to
disable this feature. If you enable this policy, you implicitly
disable port failover and dynamic path affinity.
Chapter 3
Fibre Channel Commands
OL-9163-02
Advertisement
Table of Contents
