Table of Contents
Advertisement
show ib pm threshold
show ib pm threshold
To view performance monitoring thresholds, enter the show ib pm threshold command in User
Execute mode or Privileged Execute mode.
Syntax Description
subnet-prefix
prefix
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output:
:
subnet-prefix
symbol-errors
link-recovery-errors
link-downs
rcv-errors
rcv-remote-phy-errors
rcv-switch-relay-errors
xmit-discards
xmit-constraint-errors
rcv-constraint-errors
local-link-integrity-errors
excessive-buf-overrun-errors
vl15-droppeds
xmit-rate
rcv-rate
Cisco SFS 7000 Series Product Family Command Reference Guide
6-94
show ib pm threshold subnet-prefix prefix
Specifies the subnet prefix of the thresholds to view.
Subnet prefix of the thresholds to view.
Subnet to which the threshold configuration applies.
Threshold for Symbol Error counters.
Threshold for Link Recovery Error counters.
Threshold for Link Downed counters.
Threshold for Port Receive Error counters.
Threshold for Port Receive Remote Physical Error counters.
Threshold for Port Receive Switch Relay Error counters.
Threshold for Port Transmit Discard Error counters.
Threshold for Port Transmit Constraint Error counters.
Threshold for Port Receive Constraint Error counters.
Threshold for Local Link Integrity Error counters.
Threshold for Excessive Buffer Overrun Error counters
Threshold for VL15 Dropped Error counters
Threshold for transmit rate, as a percentage of total port bandwidth
Threshold for receive rate, as a percentage of total port bandwidth
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
