Table of Contents
Advertisement
Chapter 6
Show Commands
show fc srp initiator-wwpn-view
To display SRP targets that an initiator can access through one of its virtual ports, enter the
show fc srp initiator-wwpn-view command in User Exec mode or Privileged Exec mode.
Syntax Description
wwpn
target
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
Use this command to verify that your initiator connects to all of the targets that you configured for it.
Table 6-21
Table 6-21
Field
wwpn
wwnn
description
ioc-guid
service-name
protocol-ids
fc-address
mtu
connection-type Displays nl-port to indicate a virtual FC port.
physical-access Physical FC port (in slot#/port# format) of the virtual port.
OL-9163-02
show fc srp initiator-wwpn-view wwpn target
World-wide port name (WWPN) of the virtual port of the initiator.
Displays the targets that your initiator can access through the virtual port.
describes the fields in the show fc srp initiator-wwpn-view command output.
show fc srp initiator-wwpn-view Command Field Descriptions
Description
World-wide port name (WWPN) of the target port that the initiator can access
through the virtual port.
World-wide node name (WWNN) of the target.
Description of the target.
GUID of the I/O controller of the target.
Service name of the target.
Protocols that the target supports.
Fibre Channel address of the target.
Maximum transmission unit (MTU), in bytes, of the target.
Cisco SFS 7000 Series Product Family Command Reference Guide
show fc srp initiator-wwpn-view
6-57
Advertisement
Table of Contents
