Table of Contents
Advertisement
Chapter 3
Fibre Channel Commands
fc srp it
To configure an initiator-target (IT) pair—a fully-configured link between an initiator and a target
storage device port—with your Server Switch, enter the fc srp it command in Global Configuration
mode. To delete or reconfigure an IT pair entry from the configuration file, use the no form of this
command.
Syntax Description
guid
extension
wwpn
description
descr
discover-itl
gateway-portmask-
policy
default
restricted
port-selection
test-mode
Defaults
By default, this policy denies initiators access to all targets.
OL-9163-02
fc srp it guid extension wwpn {description "descr" | discover-itl | gateway-portmask-policy
{default | test-mode | restricted port-selection}}
no fc srp it guid extension wwpn [test-mode | gateway-portmask-policy restricted
port-selection]
Global unique identifier (GUID) of the initiator.
GUID extension of the initiator.
World-wide port name (WWPN) of the target port of the FC storage device.
Assigns a description to the initiator-target pair.
Alphanumeric description to assign to the initiator target.
Discovers initiator-target-LUN (ITL) groups for the specified target and
adds them to the configuration file. For detailed information on ITLs, refer
to the Fibre Channel Gateway User Guide.
(Optional) Designates the physical FC gateway ports that the initiator can
use to access the storage port. When you add FC gateway ports to the policy,
the initiator cannot use those ports to access the storage. When you use the
no keyword to remove FC gateway ports from the policy, the initiator can
access the storage through those ports.
Assigns the global gateway portmask policy to the IT. To view your default
policy, enter the show fc srp-global command (in User Exec mode or
Privileged Exec mode) and view the default-gateway-portmask-policy
field.
(Optional) Denies the initiator access to the ports that you specify with the
port-selection variable. Use the no form of the command to add ports to the
policy to grant the initiator access.
(Optional) Port, list of ports, or range of ports to which you grant or deny the
initiator access.
(Optional) Sets an inactive initiator-target pairing to test mode, which
configures the FC gateway to log in to storage persistently and block log-ins
from SRP hosts (initiators). Use test mode as you set up your Fibre Channel
connections, then use the no form of the command to return to normal mode.
Note
Note
You cannot configure an active IT to test mode. Active ITs must
remain in normal mode.
A test-mode configuration does not persist across reboots.
Cisco SFS 7000 Series Product Family Command Reference Guide
fc srp it
3-7
Advertisement
Table of Contents
