Table of Contents
Advertisement
Chapter 6
Show Commands
show ib sm db-sync
Use this command to determine the following:
•
•
To display subnet manager synchronization information, enter the show ib sm db-sync command in
User Exec mode or Privileged Exec mode.
Syntax Description
subnet-prefix
prefix
all
Defaults
This command has no default settings.
Command Modes
User Exec mode, Privileged Exec mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Command Output:
Table 6-35
Field
subnet-prefix
enable
max-backup-sms
session-timeout
OL-9163-02
If the database of the master subnet manager synchronizes with one or more standby databases.
The frequency with which the databases synchronize.
show ib sm db-sync subnet-prefix {prefix | all}
Specifies the subnet prefix of the subnet manager with the synchronization
status that you want to view.
Prefix of the subnet manager with the synchronization status that you want
to view.
Displays synchronization data for all subnet managers on the fabric.
show ib sm db-sync Command Field Descriptions
Description
Subnet prefix of the subnet with the synchronization information that you want
to view.
Displays true if an administrator has enabled synchronization; otherwise,
displays false.
The maximum number of backup subnet managers that the master subnet
manager supports.
The interval, in seconds, during which a synchronization session status
management diagram packet must arrive at the master subnet manager to
maintain synchronization.
Cisco SFS 7000 Series Product Family Command Reference Guide
show ib sm db-sync
6-99
Advertisement
Table of Contents
