Table of Contents
Advertisement
Chapter 7
Diagnostic Commands
validate
To validate diagnostic tests, enter the validate command in the appropriate Diagnostic Configuration
submode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Diagnostic Configuration (config-diag) submode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-write user.
Examples
The following example validates diagnostic tests on port 6/2:
SFS-7000P (config-diag-if-en-6/2)# validate
Related Commands
diagnostic
show interface ethernet
show interface fc
show interface gateway
start
stop
OL-9163-02
validate
no validate
Cisco SFS 7000 Series Product Family Command Reference Guide
validate
7-227
Advertisement
Table of Contents
