Table of Contents
Advertisement
Chapter 6
Show Commands
show ib pm port counter
To display the performance monitoring counters for one or more InfiniBand ports, enter the show ib pm
port counter config subnet-prefix command in User Execute mode or Privileged Execute mode. Use
the following syntax for this version of the command:
show ib pm port counter subnet-prefix prefix [node-guid guid [port-num port]]
Syntax Descriptionx
subnet-prefix
prefix
node-guid
guid
port-num
port
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Command Output:
Table 6-33
subnet-prefix
node-guid
port-num
chassis-guid
slot-num
ext-port-num
data-is-valid
symbol-errors
link-recovery-errors
link-downs
rcv-errors
rcv-remote-phy-errors
OL-9163-02
Subnet prefix to which the port belongs.
Prefix number such as fe:80:00:00:00:00:00:00
GUID of the node to which the port belongs.
GUID number such as 00:05:ad:00:00:01:0c:19
Port number on the node.
Port number such as 1
shows the output from this command.
Table 6-33
Subnet prefix to which the port belongs.
GUID of the node to which the port belongs
Port number on the node
GUID of the chassis to which the port belongs (if available)
Slot number on the chassis to which the port belongs (if available)
Port number (if available) on the chassis slot to which the port
belongs
If false, re-run the command to obtain valid data
Symbol error counter
Link Error Recovery counter
Link Downed counter
Port Receive Error counter
Port Receive Remote Physical Error counter
show ib pm port counter (version 2) Command Output
Cisco SFS 7000 Series Product Family Command Reference Guide
show ib pm port counter
6-89
Advertisement
Table of Contents
