Table of Contents
Advertisement
show diagnostic
show diagnostic
To display diagnostics, enter the show diagnostic command in User Exec mode or Privileged Exec
mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Examples
The following example displays the system diagnostics available:
SFS-270# diagnostic ?
SFS-7000P#
card
chassis
fan
fru-error
interface
post
power-supply
rack-locator
Related Commands
show diagnostic card
show diagnostic chassis
show diagnostic fan
show diagnostic fru-error
show diagnostic interface ethernet
show diagnostic interface fc
show diagnostic interface ib
show diagnostic post
show diagnostic power-supply
show diagnostic rack-locator
Cisco SFS 7000 Series Product Family Command Reference Guide
6-32
show diagnostic
show diag ?
- Show card specific diagnostic test
- Show chassis specific diagnostic test
- Show fan specific diagnostic test
- Show the last hardware error (if any) detected
- Show interface specific diagnostic test
- Show POST status of all FRUs in the system
- Show power supply specific diagnostic test
- Show rack locator specific diagnostic test
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
