Table of Contents
Advertisement
Chapter 2
Administrative Commands
disable
To exit Privileged Exec mode and return to User Exec mode, enter the disable command in Privileged
Exec mode.
To disable a trunk group, enter the disable command in Trunk Interface Configuration submode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged Execute mode, Trunk Interface Configuration (config-if-trunk) submode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Examples
The following example exits Privileged Exec mode and enters User Exec mode:
SFS-7000P# disable
SFS-7000P>
The following example deletes a trunk group:
SFS-7000P(config-if-trunk)# disable
Related Commands
enable
show interface ethernet
OL-9163-02
disable
Cisco SFS 7000 Series Product Family Command Reference Guide
disable
2-33
Advertisement
Table of Contents
