Table of Contents
Advertisement
show config
show config
To display the startup configuration, enter the show config command in User Exec mode or Privileged
Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
The show config command displays the current configuration as a series of commands in the format
that you use when you execute commands in a CLI session. This command queries all active service
components to collect their current configuration data and translates the data into a CLI command
format.
This record of the configuration may be saved, edited, and reused to replicate a configuration.
ITLs (see the
Note
on page
Examples
The following example displays the running configuration on the Server Switch:
SFS-7000P# show config
enable
config terminal
card 2
type en4port1G
no shutdown
ib sm subnet-prefix fe:80:00:00:00:00:00:00 priority 0
interface gateway 2
authentication login default local tacacs
ip address 192.168.2.1 255.255.255.0
interface ethernet 2/1
ip address 192.168.1.1 255.255.255.0
Cisco SFS 7000 Series Product Family Command Reference Guide
6-30
show config
"fc srp itl" section on page
3-19) do not appear in the show config command output.
3-9) with default attributes (see the
Chapter 6
Show Commands
"fc srp-global itl" section
OL-9163-02
Advertisement
Table of Contents
