Table of Contents
Advertisement
fc srp itl
all
lun-policy
io-hi-mark
mark
max-retry
retry
min-io-timeout
timeout
srp-lunid
lunid
logical-id
logical-id
Defaults
Default values and behaviors appear in the Syntax Description and
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel read-write user.
The fc srp itl command configures new ITLs and sets policies to control access that the SCSI RDMA
Protocol (SRP) initiator has to the Fibre Channel storage devices on a per-lun basis. An
"initiator-target-lun" (ITL) identifies a fully-configured link between an initiator and storage.
Cisco SFS 7000 Series Product Family Command Reference Guide
3-10
Specifies all ports.
Permits the initiator to access the LUN or denies the initiator access to the
LUN.
The fc srp itl command no longer supports this syntax.
Note
This syntax appears for legacy purposes. Use the config
command to set this feature.
The fc srp itl command no longer supports this syntax.
Note
This syntax appears for legacy purposes. Use the config
command to set this feature.
The fc srp itl command no longer supports this syntax.
This syntax appears for legacy purposes. Use the config
Note
command to set this feature.
The fc srp itl command no longer supports this syntax.
This syntax appears for legacy purposes. Use the config
Note
command to set this feature.
The fc srp itl command no longer supports this syntax.
This syntax appears for legacy purposes. Use the config
Note
command to set this feature.
The fc srp itl command no longer supports this syntax. This syntax appears
for legacy purposes.
Specifies a LUN ID called the SRP LUN ID to which you map an existing FC
LUN ID. Essentially, this keyword creates an alias LUN ID.
SRP LUN ID that maps to an existing FC LUN ID. This value appears in the
srp-lunid field of the show fc srp itl command output.
Specifies the FC LUN ID to map to the SRP LUN ID.
Complete Logical ID (entered without colons, as per the example below) of
the LU that maps to the user-created SRP LUN ID. This value appears in the
fc-lunid field of the show fc srp itl command output.
Chapter 3
Fibre Channel Commands
fc srp lu
fc srp lu
fc srp lu
fc srp lu
fc srp lu
Table 3-1 on page
3-11.
OL-9163-02
Advertisement
Table of Contents
