Table of Contents
Advertisement
type
type
To assign an administrative card-type to a slot into which you want to install a card, enter the type
command in Card Configuration submode.
Syntax Description
card-type
Defaults
This command has no default settings.
Command Modes
Configuration Card (config-card) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted or card-specific read-write user.
Use the type command to reserve slots for particular card types. For instance, if you want a slot to run
only Fibre Channel gateway cards, configure the type of the slot to "fc2port2G" so that only that card
type will function in the slot. Any other card that you place in the slot will not function.
and describes available card types.
Table 2-3
Type
controller
controllerIb12port4x
controllerIb24port4x
en4port1G
en6port1G
fabric12x
fc2port2G
fc4port2G
ib12port4x
ib12port4xTX
Cisco SFS 7000 Series Product Family Command Reference Guide
2-78
type card-type
Type of card in the slot. See
Card Types
Table 2-3
Description
Configures the slot for a Cisco SFS 3012 controller card.
Configures the slot for a Cisco SFS 3001 controller card with 12 4x
InfiniBand ports.
Configures the slot for a Cisco SFS 7000 controller card with 24 4x
InfiniBand ports.
Configures the slot for a 4-port, 1Gbps Ethernet gateway.
Configures the slot for a 6-port, 1Gbps Ethernet gateway.
Configures a slot in a Cisco SFS 7008 for a fabric controller module
(FCM).
Configures the slot for a 2-port, 2Gbps Fibre Channel gateway.
Configures the slot for a 4-port, 2Gbps Fibre Channel gateway.
Configures the slot for a 12-port, 4X InfiniBand switch card.
Configures a slot in a Cisco SFS 7008 for a line interface module (LIM)
with twelve 4x InfiniBand ports.
Chapter 2
Administrative Commands
for available card types.
Table 2-3
lists
OL-9163-02
Advertisement
Table of Contents
