Table of Contents
Advertisement
show bridge-group
show bridge-group
To display the attributes of bridge groups, enter the show bridge-group command in User Exec mode
or Privileged Exec mode.
Syntax Description
bridge-groupID#
Defaults
Without an argument, the show bridge-group command shows all bridge groups.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines:
Privilege Level:
General read-only user.
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Command Output:
Table 6-6
Table 6-6
Field
bridge-group-id
bridge-group-name
eth-bridge-port
ib-bridge-port
broadcast-forwarding
broadcast-forwarding-mode
loop-protection-method
multicast
Cisco SFS 7000 Series Product Family Command Reference Guide
6-14
show bridge-group [bridge-groupID#]
(Optional) Integer value that represents a bridge group. Use the bridge-group
ID number to view the attributes of one specific bridge group.
describes the fields in the show bridge-group command output.
show bridge-group Command Field Descriptions
Description
Displays the integer-value identifier of the bridge group that the
administrator assigned with the bridge-group command.
Displays the ASCII text string identifier that the administrator assigned
with the bridge-group command.
Displays the trunk that the bridge group uses to connect to the Ethernet
switch.
Displays the internal gateway slot#/port# of the bridge-group.
Displays true if you enable broadcast-forwarding. Displays false if you
disable broadcast forwarding.
Displays one if you enable ARP Packet Painting. Displays ? if you disable
ARP Packet Painting. See the Ethernet Gateway User Guide for more
information.
Displays true if the bridge group belongs to a multicast group. Displays
false if the bridge group does not belong to a multicast group.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
