Table of Contents
Advertisement
Chapter 2
Administrative Commands
clock set
To manually configure the time and date of the on-board Server Switch clock, enter the clock set
command in Privileged Exec mode.
Syntax Description
hh
mm
ss
dd
mm
yy
Defaults
This command has no default settings.
Command Modes
Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted and general read-write user.
Your Server Switch uses one of the following means to maintain system time:
•
•
When you first power on your Server Switch, factory-default system clock settings run. To ensure
accurate synchronization, we recommend that you use an external NTP server, as it will synchronize log
dates with other management systems. To configure NTP servers, refer to the
Examples
The following example sets the clock time to 7:22 PM and 10 seconds on the 25th of May, 2015:
SFS-7000P# clock set 19:22:10 25 05 15
Related Commands
card
ntp
radius-server
show clock
OL-9163-02
clock set hh:mm:ss dd mm yy
Hour to assign.
Minute to assign.
Second to assign.
Day to assign.
Month to assign.
Year to assign.
an on-board system clock
an external NTP server (recommended)
Cisco SFS 7000 Series Product Family Command Reference Guide
clock set
"ntp" section on page
2-55.
2-21
Advertisement
Table of Contents
