Table of Contents
Advertisement
Chapter 6
Show Commands
Command Output:
Table 6-55
Table 6-55
Field
port
name
type
desc
last-change
mac-address
mtu
auto-negotiate-supported Displays "yes" if the port supports auto-negotiation.
auto-negotiate
admin-status
oper-status
admin-speed
oper-speed
admin-duplex
oper-duplex
link-trap
action
result
Table 6-56
Table 6-56
Field
port
address
mask
bcast-addr format
OL-9163-02
describes the fields in the show interface ethernet command output.
show interface ethernet Command Field Descriptions
Description
Port number, in slot#/port# format.
Administratively-configured port name.
Type of port.
Name that you assign with the name command.
Time of the most recent configuration change that a user made to the port.
MAC address of the port.
Maximum transmission unit (MTU) of the port, in bytes.
Displays "enabled" if you have configured auto-negotiation to run on the
port.
Administrative status of the port.
Operational status of the port.
Administrative speed that you configured on the port.
Operational (actual) speed at which the port runs. Actual speed differs from
admin speed if the port on the other end of the connection cannot support
the speed that you configured.
Administrative duplex type (half or full) that you configured to run on the
port.
Operational (actual) duplex type at which the port runs. Actual duplex type
differs from admin duplex type if the port on the other end of the connection
cannot support the type that you specified.
Displays "enabled" if you configured the port to send link traps with the
link-trap command.
Action (such as flushing the ARP table) that you had the interface perform.
Status of the action that you had the interface perform.
describes the fields in the ip keyword output.
ip Keyword Output Field Descriptions
Description
Port number, in card#port# format. A port# of 0 represents the gateway port of the
interface card.
IP address that you assigned to the port.
Subnet mask that you assigned to the port.
IP broadcast address format that the port uses.
Cisco SFS 7000 Series Product Family Command Reference Guide
show interface ethernet
6-149
Advertisement
Table of Contents
