Table of Contents
Advertisement
Chapter 2
Administrative Commands
The number of applications and modules may change between releases. The numbers assigned to
applications and modules may also change. Check application and module number assignments using
CLI help (?) before you execute this command, as shown in the example below.
Examples
The following example displays the applications that you can trace (output abridged):
SFS-7000P(config)# trace app ?
app <1-25>
app numbers:
APP_ID_CLI
APP_ID_OSPF
APP_ID_RIP
...
...
APP_ID_IP_AGENT
APP_ID_FIB_AGENT
APP_ID_KERNEL
APP_ID_CARD_AGENT = 25
APP_ID_SM
The following example enables tracing for application 4, module 36:
SFS-7000P(config)# trace app 4 module 36 level very-verbose flowmask 0x12 card 2
Related Commands
help
show trace
OL-9163-02
= 1
= 2
= 3
= 22
= 23
= 24
= 26
Cisco SFS 7000 Series Product Family Command Reference Guide
trace
2-77
Advertisement
Table of Contents
