Table of Contents
Advertisement
ip
ip
To assign an IP address or backup address and subnet mask to an Ethernet port, enter the ip command
in Ethernet Interface Configuration submode. To clear this configuration, use the no form of this
command.
To assign an IP address to the Ethernet Management Interface port, enter the ip command in Ethernet
Management Interface submode. To clear this configuration, use the no form of this command.
To assign an IP address to the InfiniBand Management Interface port, enter the ip command in
InfiniBand Management Interface submode. To clear this configuration, use the no form of this
command.
To configure IP networking attributes on your Server Switch, enter the ip command in Global
Configuration mode. To clear this configuration, use the no form of this command.
Note
Syntax Description
address
ip-address
subnet-mask
priority
address-priority
domain-name
name-string
name-server-one
name-server-two
server
route
dest-address
Cisco SFS 7000 Series Product Family Command Reference Guide
5-8
Layer 3 only; available to 4-port Ethernet gateways but not 6-port.
ip {address ip-address subnet-mask [priority address-priority]} no ip {address ip-address
subnet-mask}
//configures Ethernet ports
ip address ip-address subnet-mask
no ip
ip address ip-address subnet-mask
no ip
ip {domain-name name-string | name-server-one server | name-server-two server | route
dest-address dest-subnet-mask next-hop}
no ip {domain-name | name-server-one | name-server-two |
route dest-address subnet-mask next-hop}
Assigns a primary IP address to a port.
IP address to assign
Subnet mask to assign.
Assigns a priority to the backup address that determines the order in which
the backup address adopts the traffic of the primary address. Your Server
Switch does not currently support this feature.
Priority to assign. The higher the integer value, the higher the priority.
Assigns a DNS name to your Server Switch.
Domain name to assign.
Specifies a primary domain name server (DNS).
Specifies a secondary DNS.
Domain name server for your Server Switch to use.
Defines static routes to remote hosts or networks to forward IP packets.
IP address of the host or network that you want to reach.
//configures the Ethernet Management port
//configures the InfiniBand Management port
//configures a Server Switch
Chapter 5
IP Commands
OL-9163-02
Advertisement
Table of Contents
