Table of Contents
Advertisement
Chapter 6
Show Commands
show ip http
To view the configuration of the HTTP server on your Server Switch, enter the show ip http command
in User Exec mode or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Ethernet read-only user.
Use this command to determine if your HTTP server actively runs on your Server Switch, and to
determine the HTTP port number that it uses.
Command Output:
Table 6-76
Table 6-76
Field
server
port
polling
Examples
The following example displays the configuration of the HTTP server on the Server Switch:
SFS-270# show ip http
================================================================================
================================================================================
OL-9163-02
show ip http
describes the fields in the command output.
show ip http Command Output Field Descriptions
Description
Displays "enabled" if you have activated the server with the ip http server
command. Displays "disabled" if you have deactivated the server with the no ip
http server command.
Displays the HTTP port number that the HTTP server uses.
Displays "enabled" or "disabled" to indicate polling status.
server : enabled
port : 80
polling : enabled
IP HTTP Info
Cisco SFS 7000 Series Product Family Command Reference Guide
show ip http
6-185
Advertisement
Table of Contents
