Table of Contents
Advertisement
Chapter 6
Show Commands
show ib pm port monitor
To show the performance monitoring user-configured monitored ports, or the cumulative port counters,
or the cumulative port counters for ports that have exceeded thresholds, enter the show ib pm port
monitor command in User Execute mode or Privileged Execute mode.
Syntax Description
counter
error-counter
subnet-prefix
prefix
node-guid
guid
port-num
port
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output:
subnet-prefix
node-guid
port-num
chassis-guid
slot-num
ext-port-num
data-is-valid
OL-9163-02
show ib pm port monitor [counter | error-counter] subnet-prefix prefix [node-guid guid
[port-num port}]
(Optional) Show the counters accumulated since monitoring was enabled.
(Optional) Show the counters accumulated for ports that have exceeded
thresholds.
Specifies the subnet prefix of the port monitor.
Subnet prefix of the port monitor.
(Optional) Specifies the GUID of the device with the ports that you want to
view.
(Optional) GUID of the device with the ports that you want to view.
(Optional) Specifies the port number of the port that you want to view.
(Optional) Port number of the port that you want to view.
Subnet to which the connection belongs
GUID of the node belonging to the connection
Port number on the node belonging to the connection.
GUID of the chassis to which the port belongs (if available)
Slot number on the chassis to which the port belongs (if available)
Port number on the chassis slot to which the port belongs (if available)
If the value is false, re-run the command to obtain valid data
Cisco SFS 7000 Series Product Family Command Reference Guide
show ib pm port monitor
6-91
Advertisement
Table of Contents
