Table of Contents
Advertisement
Chapter 6
Show Commands
Command Output:
Table 6-9
Table 6-9
field
slot-id
up-time
used-memory
slot-id
used-memory
free-memory
used-disk-space
free-disk-space
last-image-source
primary-image-source
image
cpu-descr
fpga-firmware-rev
ib-firmware-rev
Examples
The following example displays the configuration and status information for the cards on the Server
Switch:
SFS-7000P# show card-inventory
================================================================================
================================================================================
OL-9163-02
describes the fields in the show card-inventory command output.
show card-inventory Command Field Descriptions
description
Slot number of the controller card, gateway module, or InfiniBand switch.
Number of seconds card has been active.
Total amount of local RAM being used by the card.
Displays the slot ID.
Total amount of memory used in local RAM.
Total amount of available local RAM.
Total amount of local flash memory space being used by the card.
Total amount of available local flash memory space.
Last image that the card booted.
Active system image to use when the system reboots. This value should be the
same for all cards in the system.
If only one instance of the image field appears, it indicates the system image
used to initialize the card firmware. If there are two instances of the image
field, the second instance indicates that a second system image is present on
the card.
CPU type, model, and firmware version. The disk on chip (DOC) versions are
appended to the existing CPU descriptions in this release.
Current FPGA firmware version that the card runs.
Version of InfiniBand firmware on the card.
The CLI displays the device-ID and version number of the InfiniBand
Note
chip for each card for Anafa 2 chips. This content appears in
parentheses next to the firmware version. For original Anafa chips, no
parenthetical text appears. The Cisco SFS 3001 and Cisco SFS 3012
chassis run original Anafa chips. The Cisco SFS 7000 and Cisco SFS
7008 chassis run later models.
Card Resource/Inventory Information
slot-id : 1
up-time : 615398 (seconds)
used-memory : 24184 (kbytes)
free-memory : 103652 (kbytes)
used-disk-space : 36123 (kbytes)
free-disk-space : 58702 (kbytes)
Cisco SFS 7000 Series Product Family Command Reference Guide
show card-inventory
6-23
Advertisement
Table of Contents
