Table of Contents
Advertisement
show fc srp lu
show fc srp lu
To display attributes of logical units, enter the show fc srp lu command in User Exec mode or
Privileged Exec mode.
Syntax Description
logical-id
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
Table 6-25
Table 6-25
Field
logical-id (formatted display)
description
device-category
targets
hi-mark
max-retry
min-io-timeout
dynamic-path-affinity
dynamic-gateway-port-loadbalancing
Cisco SFS 7000 Series Product Family Command Reference Guide
6-66
show fc srp lu [logical-id]
(Optional) LU identifier, in 64-byte, hexadecimal format. Be sure to omit all
colons.
describes the fields in the show fc srp lu command output.
show fc srp lu Command Field Descriptions
Description
ID of the LUN.
User-defined LU description.
Displays "random" or "sequential" to identify the type of
LUN.
Displays the WWPN of the target in which the LUN resides.
The maximum number of outstanding requests from the
initiator to the storage that the ITL can maintain.
Displays the number of failed communication attempts that
must occur before the LUN identifies the initiator as
inaccessible.
Maximum amount of time that elapses before a SRP request
times out.
Displays true if you enable the feature and false if you disable
the feature.
Displays true if you enable the feature and false if you disable
the feature.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
