Table of Contents
Advertisement
show interface fc
Table 6-62
Field
protocol-ids
fc-address
mtu
connection-type For this release, all targets connect to NL_Ports.
physical-access Port, in slot#/port# format, on your Server Switch to which the target connects.
Table 6-63
Table 6-63
Field
guid
extension
initiator-description
wwnn
port
wwpn
fc-address
Examples
The following example shows the output of the show interface fc command without the statistics
keyword:
SFS-7000P# show interface fc 5/1
======================================================================
======================================================================
auto-negotiate-supported : yes
Cisco SFS 7000 Series Product Family Command Reference Guide
6-160
targets Keyword Output Field Descriptions (continued)
Description
Lists the protocols that the target supports.
Fibre Channel protocol address of the target.
Maximum transmission unit (MTU) of the target, in bytes.
describes the fields in the virtual-ports keyword output.
virtual-ports Keyword Output Field Descriptions
Description
GUID of the physical initiator.
GUID extension of the physical initiator.
Administratively-assigned description of the initiator.
World-wide node name (WWNN) of the initiator.
Physical port on your Server Switch to which the virtual port maps.
World-wide port name (WWPN) of the virtual port.
Fibre Channel protocol address of the virtual port.
Fibre Channel Interface Info
port : 5/1
name : 5/1
type : fc2GFX
desc : 5/1 (321)
last-change : none
fc-address : 00:00:00
wwnn : 00:00:00:00:00:00:00:00
wwpn : 00:00:00:00:00:00:00:00
mtu : 2080
auto-negotiate : enabled
admin-status : up
oper-status : down
admin-speed : 2gbps
oper-speed : unknown
oper-duplex : unknown
admin-connection-type : force-NL
oper-connection-type : down
link-trap : enabled
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
