Table of Contents
Advertisement
name
name
To assign a user-defined name to an interface port, enter the name command in the appropriate Interface
Configuration submode.
Syntax Description
string
Defaults
By default, the name of a port appears as a slot#/port# pair.
Command Modes
Interface Configuration (config-if-fc, config-if-ib, config-if-ether) submodes.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Fibre Channel read-write user, InfiniBand read-write user, Ethernet read-write user.
The name can be used to simplify port identification and indicate port use. Assign the same name to
multiple ports to identify the ports as a group with a uniform function. The name that you assign appears
in the name field of the appropriate show interface command.
Cisco SFS 7000 Series Product Family Command Reference Guide
2-54
name string
Alphanumeric ASCII text string (up to 20 characters, including spaces) to
assign to one or more ports.
Chapter 2
Administrative Commands
OL-9163-02
Advertisement
Table of Contents
