Table of Contents
Advertisement
fc srp-global gateway-portmask-policy restricted
fc srp-global gateway-portmask-policy restricted
To deny new initiators port access to FC gateway ports, enter the fc srp-global
gateway-portmask-policy restricted command in Global Configuration mode. To grant port access
to new initiators, enter the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
Restricted
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel read-write user.
Apply the default policy to new ITs and ITLs to restrict access so new SRP initiators do not use the Fibre
Channel gateway or see the Fibre Channel fabric. If you do not restrict access, new SRP initiators can
communicate through the FC gateway ports. You can modify access policies on an individual basis with
the fc srp itl command.
Note
Policies only apply to ITs and ITLs that you create after you configure the policies.
Examples
The following example denies port access to all new ITLs:
SFS-7000P(config)# fc srp-global gateway-portmask-policy restricted
Related Commands
show fc srp initiator
show interface fc
Cisco SFS 7000 Series Product Family Command Reference Guide
3-18
fc srp-global gateway-portmask-policy restricted
no fc srp-global gateway-portmask-policy restricted
Chapter 3
Fibre Channel Commands
OL-9163-02
Advertisement
Table of Contents
