Table of Contents
Advertisement
Chapter 6
Show Commands
show interface ib
To display attributes of InfiniBand ports, enter the show interface ib command in User Exec mode or
Privileged Exec mode.
Syntax Description
port-selection
sma
node-info
port-info
detail
statistics
Defaults
See
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Without the optional sma or statistics keywords, the show interface ib command displays general
information about the InfiniBand interface port, such as its administrative status, its operational speed
and status, and duplex mode.
Command Output:
Table 6-69
Table 6-69
Field
port
name
OL-9163-02
show interface ib port-selection [sma {node-info | port-info [detail]} | statistics]
Port, list of ports, or range of ports that you want to view.
(Optional) Displays subnet management agent (SMA) information.
(Optional) Displays node-based SMA information.
(Optional) Displays port-based SMA information
(Optional) Displays detailed, port-based SMA information.
(Optional) Displays InfiniBand interface traffic statistics.
Table 6-69
through
Table
6-73.
describes the fields in the show interface ib command output.
show interface ib Command Field Descriptions
Description
Identifies the InfiniBand interface card and port.
The format is slot#/port#.
User assigned name. If no name is assigned, the
port name is displayed instead. This field is set by
the name command.
Cisco SFS 7000 Series Product Family Command Reference Guide
show interface ib
6-167
Advertisement
Table of Contents
