Table of Contents
Advertisement
trunk-group
trunk-group
To assign a trunk group to one or more Ethernet interfaces, enter the trunk-group command in Ethernet
Interface Configuration submode. To remove a trunk group from the configuration, enter the no form of
this command.
Syntax Description
id
Defaults
By default, trunk groups do not apply to interfaces.
Command Modes
Ethernet Interface Configuration (config-if-ether) submode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-write user.
The trunk-group command assigns an already-configured trunk group to the Ethernet interface.
Examples
The following example assigns a trunk group to the Ethernet interface (slot 2, ports 1 - 4):
SFS-7000P(config-if-ether-2/1-2/4)# trunk-group 2
Related Commands
config TACACS-server host
show trunk
show interface ethernet
Cisco SFS 7000 Series Product Family Command Reference Guide
5-12
trunk-group id
no trunk-group id
Integer that identifies the trunk-group.
Chapter 5
IP Commands
OL-9163-02
Advertisement
Table of Contents
