Table of Contents
Advertisement
Chapter 3
Fibre Channel Commands
fc srp-global itl
To configure the default attributes that your Server Switch assigns to all new ITLs, enter the fc
srp-global itl command in Global Configuration mode. To configure any attribute to an empty string
or disable an attribute, use the no form of this command.
Syntax Description
sequential
dynamic-gateway-port
-failover
dynamic-gateway-port
-loadbalancing
dynamic-path-affinity The fc srp-global itl command no longer supports this syntax. This syntax
io-hi-mark
mark
max-retry
retry
min-io-timeout
timeout
Defaults
By default, the fc srp-global itl command configures ITLs for random (non-sequential) targets. For
additional default values, see
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel read-write user.
OL-9163-02
fc srp-global itl [sequential] {dynamic-gateway-port-failover |
dynamic-gateway-port-loadbalancing | dynamic-path-affinity | io-hi-mark mark |
max-retry retry | min-io-timeout timeout}
no fc srp-global itl [sequential] {dynamic-gateway-port-failover |
dynamic-gateway-port-loadbalancing | dynamic-path-affinity | io-hi-mark |
max-retry | min-io-timeout}
(Optional) Configures SRP global defaults for ITLs of sequential access
devices.
The fc srp-global itl command no longer supports this syntax. This syntax
appears for legacy purposes.
The fc srp-global itl command no longer supports this syntax. This syntax
appears for legacy purposes.
appears for legacy purposes.
Assigns the maximum number of I/O requests that the initiator can send to
the storage device.
Maximum number of requests that the initiator can send to the storage
device.
Assigns the maximum number of consecutive, failed attempts to pass traffic
to a LUN that the initiator makes before it identifies the LUN as inaccessible.
Number of retries before an initiator recognizes a LUN as inaccessible.
Configures the maximum amount of time during which the storage device
can accept I/O.
Maximum amount of time during which a storage device can accept I/O.
Table 3-3 on page
3-20.
Cisco SFS 7000 Series Product Family Command Reference Guide
fc srp-global itl
3-19
Advertisement
Table of Contents
