Table of Contents
Advertisement
Chapter 6
Show Commands
show fc srp it
To display initiator-target pairs that you have configured or that your Server Switch has discovered, enter
the show fc srp it command in User Exec mode or Privileged Exec mode.
Syntax Description
guid
extension
target-wwpn
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user.
Use this command to verify that you successfully created IT pairs on your Server Switch.
Table 6-22
Field
guid
extension
target-wwpn
description
non-restricted-ports
active-ports
physical-access
mode
OL-9163-02
show fc srp it [guid extension target-wwpn]
(Optional) GUID of the initiator in the IT pair.
(Optional) GUID extension of the initiator in the IT pair.
(Optional) World-wide port name (WWPN) of the target FC storage port in
the IT pair.
show fc srp it Command Output Field Descriptions
Description
GUID of the initiator in the initiator-target pair.
GUID extension of the initiator in the initiator-target pair.
WWPN of the target storage.
User-assigned description of the initiator-target pair.
Ports on your Server Switch that grant the initiator of the IT pair access to
storage.
Ports on your Server Switch through which the initiator of the IT pair passes
traffic.
Physical ports on your Server Switch to which the initiator of the IT pair
connects.
Displays "normal-mode" or "test-mode." Configure the mode to normal-mode
to permit initators to log in to storage. In test-mode, the FC gateway persistently
logs in to storage and blocks the initiators.
Cisco SFS 7000 Series Product Family Command Reference Guide
show fc srp it
6-59
Advertisement
Table of Contents
