Table of Contents
Advertisement
Chapter 5
IP Commands
redundancy-group
To create or configure a redundancy group, enter the redundancy-group command in Global
Configuration mode. To disable an attribute of a redundancy group or to delete a redundancy group, use
the no form of this command.
redundancy-group rg-number [broadcast-forwarding | load-balancing | multicast |
new-member-force-reelection | name name]
no redundancy-group rg-number [broadcast-forwarding | load-balancing | multicast |
new-member-force-reelection]
Syntax Description
rg-number
broadcast-forwarding
load-balancing
multicast
new-member-force-ree
lection
name
name
Defaults
By default, load balancing does not run on redundancy groups.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-write user.
Create and configure redundancy groups with this command.
Examples
The following example creates a redundancy group:
SFS-7000P(config)# redundancy-group 11
Related Commands
show redundancy-group
bridge-group
OL-9163-02
Number of the redundancy group.
(Optional) Enables broadcast forwarding for all members of the redundancy
group
(Optional) Enables load balancing among all members of the group.
(Optional) Enables multicast forwarding for all members of the redundancy
group
(Optional) Configures the redundancy group to force reelection when a new
member joins.
(Optional) Configures a name for the redundancy group
Name to assign to the redundancy group.
Cisco SFS 7000 Series Product Family Command Reference Guide
redundancy-group
5-11
Advertisement
Table of Contents
