Table of Contents
Advertisement
Chapter 2
Administrative Commands
location
To assign a text-based location identifier to your Server Switch, enter the location command in Global
Configuration mode. To reset the location to an empty string, use the no form of this command.
Syntax Description
string
Defaults
This command has no default settings.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Use the location command to assign a readable identifier to your Server Switch. Use the location string
to identify support providers, the Server Switch owner, the Server Switch itself, or the physical location
of the Server Switch. Display the location with the show location command.
Note
The location command configures the same parameter that the snmp-server command configures
with the location and location-string arguments.
Examples
The following example assigns a location to the Server Switch:
SFS-7000P(config)# location "515 Ellis Street, Mountain View, CA 94043"
Related Commands
snmp-server
show location
show version
OL-9163-02
location "string"
no location
Refers to an ASCII text string. Enclose multi-word strings within
double-quotes (",").
Cisco SFS 7000 Series Product Family Command Reference Guide
location
2-47
Advertisement
Table of Contents
