Show Ip Adjacency - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show ip adjacency

To display adjacency information, use the show ip adjacency command.
Syntax Description ip-addr
interface
detail
non-best
statistics
summary
vrf vrf-name
all
default
management
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines The counter values in the output of show ip adjacency {statistics | detail} command are cleared after
a supervisor module switchover.
This command does not require a license.
Examples This example shows how to display a summary of the adjacency information:
switch# show ip adjacency summary
Related Commands Command
show forwarding
adjacency
OL-27852-01
show ip adjacency [ip-addr | interface] [detail] [non-best] [statistics] [summary] [vrf {vrf-name
| all | default | management}]
(Optional) IPv4 source address. The format for IPv4 is x.x.x.x.
(Optional) Interface. Use ? to determine the supported interface types.
(Optional) Displays detailed adjacency information.
(Optional) Displays both the best and nonbest adjacency information.
(Optional) Displays adjacency statistics.
(Optional) Displays a summary of the adjacency information.
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
(Optional) Displays adjacency statistics for all VRF entries.
(Optional) Displays adjacency statistics for the default VRF.
(Optional) Displays adjacency statistics for the management VRF.
Modification
This command was introduced.
Description
Displays forwarding adjacency information.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show ip adjacency
427