Table of Contents
Advertisement
2 Register the ZENworks Linux Management Server to Novell Customer Center.
On SLES 10: Execute
ZENworks_Linux_Management_server> <E-
Mail_Id_of_Novell_Customer_Center_Account>
<License_key_for_ZENworks_Linux_Management_or_the_product_
that_entitles_you_to_ZENworks Linux Management
On Other Servers: Execute the
The ZENworks Linux Management Server acts as a Satellite server and registers all the
managed devices to Novell Customer Center.
3 Log in to the ZENworks Control Center, then click the Configuration tab.
4 In Management Zone Settings, click Novell Customer Center to display the Novell Customer
Center page.
5 Configure the following settings to register the managed devices and upload their basic
hardware inventory information to Novell Customer Center:
Select Enable link-up with Novell Customer Center.
This enables the server to periodically transmit information about itself and its managed
devices to Novell Customer Center.
In Update Interval (Hrs), specify how often the server must send information to Novell
Customer Center. By default, the interval is 3 hours.
6 Click Apply, then click OK.
NOTE: To view the information uploaded by the ZENworks Linux Management Satellite server,
ensure that the Novell Customer Center account is created before registering the ZENworks Linux
Management Server to Novell Customer Center.
7.12 Configuring the ZENworks Server
Preferences
ZENworks Server preferences are used to control events triggered from managed device as well as
from ZENworks Server. These preferences are configured by default. The following preferences are
available for the ZENworks Linux Management Server:
allow-rebuild: Enables or disables the rebuild action of the managed device during the device
registration process. The default value is False.
compute-package-device-updates: Enables or disables both Package Updates and Device
Updates Queue actions triggered on the ZENworks Server. The default value is True.
show-updates-icon: Enables or disables the Updates icon for devices displayed under the
Devices tab. The default value is True.
78
Novell ZENworks 7.3 Linux Management Administration Guide
zlm-ncc-reg <IP_address_of_the
command.
zlm-ncc-reg
>
Advertisement
Table of Contents
