A.1 Configuring the SSL and HTTP
Communication between the ZENworks
Handheld Management Server and the ZENworks
Handheld Management Access Point
You can configure the SSL and HTTP settings using
1 Run
cgfip.exe
2 Obtain a server certificate before using SSL.
2a In the Configure IP dialog box, click Obtain Server Certificate.
2b Review the information in the Certificate Wizard page, then click Next.
2c In the Common name option, specify the name of the machine as specified during the
installation of the ZENworks Handheld Management Server.
For example, if IP address is specified during the installation of the ZENworks Handheld
Management Server, you must specify the IP Address in the Common name option. If the
DNS name is specified during the installation of the ZENworks Handheld Management
Server, you must specify the DNS name in the Common name option
2d (Conditional) If the specified DNS name is not resolvable by the network, then you must
modify the machine name as follows:
2d1 Stop the ZENworks Handheld Management Services running on the system.
2d2 Run
2d3 Read the information on the initial screen, then click Next.
2d4 On the Database Type page, select Microsoft SQL Server and specify the new name
82
Novell ZENworks 7 Handheld Management Installation Guide
from the ZENworks Handheld Management installation folder.
from ZENWorks Handheld Management installation folder to
CfgSrvr.exe
launch the ZENworks Handheld Management wizard.
in the Machine name option.
.
cgfip.exe