Table of Contents
Advertisement
Configuring the Post-connect
A
Server
The following sections contain more information:
Section A.1, "Overview," on page 385
Section A.2, "Extracting the ZIP File," on page 385
Section A.3, "ZIP File Contents," on page 386
Section A.4, "Setting up a Post-connect Host," on page 387
Section A.5, "Viewing Logs," on page 390
Section A.6, "Testing the Service," on page 390
Section A.7, "Configuring Your Sensor," on page 391
Section A.8, "Allowing Novell ZENworks Network Access Control Through the Firewall," on
page 391
A.1 Overview
This section describes how to configure the remote server for use with the Novell ZENworks
Network Access Control post-connect feature. The post-connect server can be a Windows server or
a Linux server. This section details the following:
Section A.2, "Extracting the ZIP File," on page 385
Section A.2.1, "Windows," on page 386
Section A.2.2, "Linux," on page 386
Section A.3, "ZIP File Contents," on page 386
Section A.4, "Setting up a Post-connect Host," on page 387
Section A.4.1, "Windows," on page 387
Section A.4.2, "Linux," on page 388
Section A.5, "Viewing Logs," on page 390
Section A.6, "Testing the Service," on page 390
Section A.7, "Configuring Your Sensor," on page 391
A.2 Extracting the ZIP File
The following sections contain more information:
Section A.2.1, "Windows," on page 386
Section A.2.2, "Linux," on page 386
Configuring the Post-connect Server
A
385
Advertisement
Table of Contents
