Display Isis Spf-Log - 3Com S7906E Command Reference Manual

Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
IPV4 Dest : 1.1.0.0/16
Admin Tag : -
IPV4 Dest : 1.2.0.0/16
Admin Tag : -
NextHop :
Direct
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 1-12 display isis route verbose command output description
Route information for ISIS(1)
ISIS(1) IPv4 Level-1 Forwarding Table
ISIS(1) IPv4 Level-2 Forwarding Table
IPV4 Dest
Int. Cost
Ext. Cost
Admin Tag
Src Count
Flag
Next Hop
Interface
ExitIndex

display isis spf-log

Syntax
display isis spf-log [ process-id | vpn-instance vpn-instance-name ]
View
Any view
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
Int. Cost : 20
Src Count : 2
Int. Cost : 10
Src Count : 3
Interface :
Vlan1
Field
1-23
Ext. Cost : NULL
Flag
Ext. Cost : NULL
Flag
ExitIndex :
0x00000000
Description
Route information for IS-IS process 1
IS-IS IPv4 routing information for Level-1
IS-IS IPv4 routing information for Level-2
IPv4 destination
Internal route cost
External route cost
Tag
Count of advertising sources
Route state flag
R: Indicates the route have been installed into
the routing table.
L: The route has been flooded in an LSP.
U: Route leaking flag. If it is UP, routes from L2 to
L1 cannot be advertised back to L2.
Next hop
Outgoing interface
Index of the outgoing interface
: -/-/-
: D/L/-