Administrator Bui Reset Password Command; Help Display - Nortel Communication Server 1000S Service Implementation Manual

Example:
PSweditor, FUpgrade, SWupgrade, ABreset, ?: sw
software release: 03, issue: 07
Modify, Save, Cancel: m
Modify software? (Yes, (No)) yes
Modify, Save, Cancel: Save
Installation of MIVS s/w in progress...
New s/w will be used following MIVS restart.
Restart MIVS? (Yes, (No)) Yes
3 After the upgrade is complete, it is safe to remove the PC Card flash card
from the upper PC Card slot (drive B:).

Administrator BUI Reset Password command

The Administrator BUI Reset Password (ABreset) command enables the
password for access to the BUI to be reset. The default password for the BUI
is 000000 (six zeros).
To reset the BUI password to the default value, follow this example:
PSweditor, FUpgrade, SWupgrade, ABReset, ?: abr
Reset BUI Administrator Password? (Yes, (No)): Yes
Password has been reset.
PSweditor, FUpgrade, SWupgrade, ABreset, ?:

Help display

When the Help (?) command is selected, the system displays the Protected
Administration commands. See Table 15.
Table 15
Help display – Protected Administration commands (Part 1 of 2)
Short Command
ps or PS
fu or FU
Hospitality Integrated Voice Services Service Implementation Guide
Administration using the CLI
Full Command Description
PSweditor Password Editor
FUpgrade Functionality Upgrade; allows or
restricts capabilities secured by
the keycode
Page 107 of 136