Attaching The T320 Router Installation Handle; Figure 40: Removing A Power Supply Before Installing The Installation; Figure 41: Attaching The Installation Handle - Juniper Core Router T Series Hardware Manual

Attaching the T320 Router Installation Handle

See Also
Copyright © 2018, Juniper Networks, Inc.
To assist you with the installation of the T320 router, attach the installation handle over
the power supply slots of the chassis. To attach the handle:
Attach the installation handle by tightening the captive screws of the handle into the
1.
holes previously occupied by the captive screws of the power supplies (see
Figure 41 on page 125).
Figure 40: Removing a Power Supply Before Installing the Installation Handle

Figure 41: Attaching the Installation Handle

T320 Router Installation Summary on page 107
T320 Installation Safety Guidelines on page 335
Chapter 17: Installing the T320 With a Mechanical Lift
125