T320 Clearance Requirements For Airflow And Hardware Maintenance; Figure 32: Typical Open-Frame Rack - Juniper Core Router T Series Hardware Manual
Hide thumbs
Also See for Core Router T Series:
- Monitoring and troubleshooting manual (812 pages) ,
- Handling instructions manual (12 pages)
Table of Contents
Advertisement
Related
Documentation
T320 Clearance Requirements for Airflow and Hardware Maintenance
Copyright © 2018, Juniper Networks, Inc.
EIA-310-D) published by the Electronics Industry Association. You can stack three routers
in a rack that has at least 44 U (77 in. or 1.96 m) of usable vertical space.
The rack must be strong enough to support the weight of the fully configured router, up
to approximately 370 lb (168 kg). If you stack three fully configured routers in one rack,
it must be capable of supporting about 1110 lb (504 kg).
Figure 32: Typical Open-Frame Rack
T320 Chassis Description on page 13
Installing the T320 Mounting Hardware for a Four-Post Rack or Cabinet on page 117
Installing the T320 Mounting Hardware for an Open-Frame Rack on page 115
When planning the installation site, you must allow sufficient clearance around the rack
(see
Figure 33 on page
92):
For the cooling system to function properly, the airflow around the chassis must be
unrestricted.
Figure 13 on page 26
Chapter 9: Preparation Overview
depicts the airflow in the router.
91
Advertisement
Table of Contents
Troubleshooting
