Figure 107: Installing A Pic - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
See Also
Related
Documentation
244
slightly beneath the faceplate of the PIC. For a PIC installed in a Type 2 FPC or Type
3 FPC, use a narrow-ended tool that fits inside the opening that leads to the button.
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see request chassis pic.
The normal functioning status LED confirms that the PIC is online. You can also verify
correct PIC functioning by issuing the

Figure 107: Installing a PIC

Preventing Electrostatic Discharge Damage to a T320 Router on page 330
T320 PIC Description on page 67
Maintaining T320 PICs and PIC Cables on page 283
Troubleshooting the T320 PICs on page 302
Preventing Electrostatic Discharge Damage to a T320 Router on page 330
T320 PIC Description on page 67
Maintaining T320 PICs and PIC Cables on page 283
Troubleshooting the T320 PICs on page 302
show chassis fpc pic-status
Copyright © 2018, Juniper Networks, Inc.
command.