T640 Core Router Hardware Guide
Related
Documentation
T640 Connector Interface Panel (CIP) Description
46
T640 Chassis Description on page 13
Troubleshooting Using the T640 Craft Interface LEDs
Replacing a T640 Craft Interface on page 196
The Connector Interface Panel (CIP) consists of Ethernet, console, and auxiliary
connectors for the Routing Engines and alarm relay contacts (see Figure 26 on page 47).
The front electrostatic discharge point is located near the bottom of the CIP. The CIP is
located at the left side of the FPC card cage.
The CIP is hot-pluggable.
Copyright © 2010, Juniper Networks, Inc.