Routine Maintenance Procedures; Routine Maintenance Procedures For The T320 Router - Juniper Core Router T Series Hardware Manual
Hide thumbs
Also See for Core Router T Series:
- Monitoring and troubleshooting manual (812 pages) ,
- Handling instructions manual (12 pages)
Table of Contents
Advertisement
CHAPTER 30
Routine Maintenance Procedures
Routine Maintenance Procedures for the T320 Router
Purpose
Action
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Routine Maintenance Procedures for the T320 Router on page 271
For optimum router performance, perform preventive maintenance procedures.
NOTE:
Some components, such as the Connector Interface Panel (CIP) and
the craft interface, require no maintenance.
On a regular basis:
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the router and into the air intake vents.
Check the status-reporting devices on the craft interface: system alarms, LEDs, and
LCD.
Inspect the air filters at the bottom front and left rear of the router, replacing them
every 6 months. Do not run the router for more than a few minutes without the air filters
in place.
T320 Chassis Description on page 13
T320 Craft Interface Description on page 20
Maintaining the T320 Air Filters on page 274
271
Advertisement
Table of Contents
Troubleshooting
