T320 Physical Specifications; Figure 33: T320 Chassis Dimensions And Clearance Requirements - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
Related
Documentation

T320 Physical Specifications

92
NOTE: If you mount the router in a cabinet, be sure that ventilation is
sufficient to prevent overheating.
For service personnel to remove and install hardware components, there must be
adequate space at the front and back of the router. At least 24 in. (61 cm) is required
both in front of and behind the router. NEBS GR-63 recommends that you allow at
least 30 in. (72.6 cm) in front of the rack.

Figure 33: T320 Chassis Dimensions and Clearance Requirements

T320 Cooling System Description on page 25
T320 Chassis Description on page 13
T320 Physical Specifications on page 92
Table 49 on page 92 lists the T320 router's physical specifications.
Table 49: T320 Physical Specifications
Description
Chassis dimensions
Router weight
Weight
25.13 in. (63.82 cm) high
17.43 in. (44.3 cm) wide
31 in. (78.7 cm) deep (including cable management
system) 35.5 in. (90.2 cm)
Chassis with midplane: 131.4 lb (59.6 kg)
Minimum configuration: 272.1 lb (123.4 kg)
Maximum configuration: 369.9 lb (167.8 kg)
Copyright © 2018, Juniper Networks, Inc.