T320 Sib Leds; Table 47: T320 Sib Leds - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
Related
Documentation

T320 SIB LEDs

Table 47: T320 SIB LEDs

Label Color
Green
ACTIVE
Green
OK
FAIL Yellow
Related
Documentation
86
Each Type 1 FPC and Type 2 FPC has one dedicated ASIC with five high-speed links
that connect to the three SIBs:
One high-speed link connects to
Two high-speed links connect to
Two high-speed links connect to
Each Type 3 FPC has two dedicated ASICs with five high-speed links that connect to
the three SIBs.
Three LEDs located on the SIB faceplate that display the status of the
LEDs" on page 86 describes the functions of the SIB LEDs.
SIB online/offline button, located on the SIB faceplate.
T320 SIB LEDs on page 86
Maintaining the T320 SIBs on page 286
Replacing a T320 SIB on page 259
Table 47 on page 86 describes the functions of theT320 SIB LEDs. If all three LEDs are
off, the SIB is not receiving power. The craft interface has three additional LEDs that show
the status of each SIB.
State Description
On steadily SIB is in active mode.
On steadily SIB is functioning normally.
Blinking SIB is starting up.
On steadily SIB has failed.
T320 Switch Interface Boards (SIBs) Description on page 85
Maintaining the T320 SIBs on page 286
Replacing a T320 SIB on page 259
.
SIB0
SIB1
.
SIB2
Copyright © 2018, Juniper Networks, Inc.
SIB."T320 SIB