Replacing A T320 Dc Power Supply Cable; Removing A T320 Dc Power Supply Cable; Figure 112: Installing A Replacement T320 Power Supply - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
See Also
Related
Documentation

Replacing a T320 DC Power Supply Cable

Removing a T320 DC Power Supply Cable

254

Figure 112: Installing a Replacement T320 Power Supply

T320 Power System Description on page 83
Maintaining the T320 Power Supplies on page 284
T320 Power System Electrical Specifications on page 96
Site Electrical Wiring Guidelines for Juniper Networks Devices on page 361
T320 Power System Description on page 83
Maintaining the T320 Power Supplies on page 284
T320 Power System Electrical Specifications on page 96
Site Electrical Wiring Guidelines for Juniper Networks Devices on page 361
Removing a T320 DC Power Supply Cable on page 254
1.
Installing a T320 DC Power Supply Cable on page 256
2.
Locate a replacement power cable that meets the specifications defined in
1.
Power Cable Specifications" on page
CAUTION: A licensed electrician must attach a cable lug to the power
cable that you supply. A cable with an incorrectly attached lug can damage
the router (for example, by causing a short circuit).
Make sure that the voltage across the DC power source cable leads is 0 V and that
2.
there is no chance that the cables might become active during the removal process.
95.
Copyright © 2018, Juniper Networks, Inc.
"T320 DC