Figure 57: Reinstalling An Fpc - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
148
Slide the FPC all the way into the card cage until you feel resistance.
7.
Starting with the ejector handles on the FPC faceplate nearly horizontal, simultaneously
8.
turn both ejector handles clockwise to seat the FPC.
If you are installing a Type 2 FPC or Type 3 FPC, tighten the screws inside the ejector
9.
handles to secure the FPC. Do not overtighten them.
Repeat the procedure to reinstall each remaining FPC.
10.

Figure 57: Reinstalling an FPC

Copyright © 2018, Juniper Networks, Inc.