Juniper Core Router T Series Hardware Manual page 349

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Wait until a message appears on the console confirming that the operating system
has halted.
For more information about the command, see request system halt.
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
3.
ESD points on the chassis.
Shut down power to the router by pressing the AC input switch or DC circuit breaker
4.
for all power supplies to the off (
Disconnect power from the router.
5.
Remove the cables that connect to all external devices.
6.
Remove all field replaceable units (FRUs) from the router.
7.
Remove the router from the rack:
8.
If you are using a mechanical lift, place the lift platform under the router, unscrew
and remove the mounting screws from the rack, and move the router to the shipping
crate.
If you are not using a mechanical lift and the router weight is fully supported by a
shelf or another router, unscrew and remove the mounting screws from the rack.
Three people can then lift the router and move it to the shipping crate.
If you are not using a mechanical lift and the router weight is not fully supported by
a shelf or another router, three people should grasp the router while a fourth person
unscrews and removes the mounting screws from the rack. The three lifters can
then move the router to the shipping container.
Place the router in the shipping crate or onto the pallet. If on a pallet, bolt the router
9.
to the pallet.
Cover the router with an ESD bag and place the packing foam on top of and around
10.
the router.
Replace the accessory box on top of the packing foam.
11.
Securely tape the box closed or place the crate cover over the router.
12.
Write the RMA number on the exterior of the box to ensure proper tracking.
13.
Tools and Parts Required to Replace the T320 Hardware Components on page 176
Locating T320 Component Serial Numbers Using the CLI on page 311
Chapter 35: Packing and Returning Components
) position.
O
321