Installation Safety Warnings For Juniper Networks Devices; Intrabuilding Ports Warning; Installation Instructions Warning - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
Related
Documentation

Installation Safety Warnings for Juniper Networks Devices

Intrabuilding Ports Warning

Installation Instructions Warning

336
Before lifting or moving the router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
T320 Site Preparation Checklist Requirements on page 89
Installation Safety Warnings for Juniper Networks Devices on page 336
Overview of Installing the T320 Router Without a Mechanical Lift on page 129
Observe the following warnings before and during hardware equipment installation:
Intrabuilding Ports Warning on page 336
Installation Instructions Warning on page 336
Rack-Mounting Requirements and Warnings on page 337
Ramp Warning on page 340
WARNING: The intrabuilding ports of the equipment or subassembly are
suitable for connection to intrabuilding or unexposed wiring or cabling only.
The intrabuilding ports of the equipment or subassembly MUST NOT be
metallically connected to interfaces that connect to the Outside Plant (OSP)
or its wiring. These interfaces are designed for use as intrabuilding interfaces
only (Type 2 or Type 4 ports as described in GR-1089) and require isolation
from the exposed OSP cabling. The addition of Primary Protectors is not
sufficient protection in order to connect these interfaces metallically to OSP
wiring.
WARNING: Read the installation instructions before you connect the hardware
equipment to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Copyright © 2018, Juniper Networks, Inc.